spec no: dsad1166 rev no: v.2 date: may/21/2009 page: 1 of 5 approved: wynec checked: allen liu drawn: s.p.chen erp: 1204000187 3.5x2.0mm smd chip led lamp part number: apk3520mgc mega green features z 3.5mmx2.0mm smt led, 1.3mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package : 2000pcs / reel. z moisture sensitivity level : level 4. z rohs compliant. description the mega green source color devices are made with algainp on gaas substrat e light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subject to change without notice. 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications.
spec no: dsad1166 rev no: v.2 date: may/21/2009 page: 2 of 5 approved: wynec checked: allen liu drawn: s.p.chen erp: 1204000187 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 the optical centerline value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 apk3520mgc mega green (algainp) water clear 36 90 120 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength mega green 574 nm i f =20ma d [1] dominant wavelength mega green 570 nm i f =20ma ? 1/2 spectral line half-width mega green 26 nm i f =20ma c capacitance mega green 20 pf v f =0v;f=1mhz v f [2] forward voltage mega green 2.1 2.5 v i f =20ma i r reverse current mega green 10 ua v r =5v parameter mega green units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsad1166 rev no: v.2 date: may/21/2009 page: 3 of 5 approved: wynec checked: allen liu drawn: s.p.chen erp: 1204000187 mega green apk3520mgc
spec no: dsad1166 rev no: v.2 date: may/21/2009 page: 4 of 5 approved: wynec checked: allen liu drawn: s.p.chen erp: 1204000187 apk3520mgc reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) tape dimensions (units : mm)
spec no: dsad1166 rev no: v.2 date: may/21/2009 page: 5 of 5 approved: wynec checked: allen liu drawn: s.p.chen erp: 1204000187 packing & label specifications apk3520mgc
|
